hydraulic, single acting
asymmetric rod seal for standard applications. interference fit on outside diameter maintains stabile fit in the housing. design provides ultimate sealing effect over a wide temperature range, good backpumping ability and low tendency to "stick-slip". also used as secondary seal in combination with O-ring activated PTFE-seal type S09.

hydraulic, single acting
as profile S01-P, but more adapation possibilities to diverse temperatures and media by selection of suitable seal material.

hydraulic, single acting
asymmetric rod seal for standard applications as S01-P, but due to design with active backring suitable for larger extrusion gaps or higher pressure.
S02-P for standard housing design.

hydraulic, single acting
asymmetric rod seal for standard applications as S02-P, but design with triangular backring for short housings.

hydraulic, single acting
as profile S02-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.
S02-R for standard housing design.

hydraulic, single acting
asymmetric rod seal for standard applications as S02-R, but design with triangular backring for short housings

PTFE-rodseal, single acting
O-ring activated, asymmetrical PTFE rod seal, low friction and good dry running properties. good adaption possibilities to diverse temperatures and media by selection of suitable O-ring material, almost no dead spots as required for applications in food and pharma industry.

hydraulic, single acting
O-ring activated, asymmetrical rod seal. interference fit on outside diameter maintains stable fit in the housing. design provides ultimate sealing effect. especially suitable for short stroke applications (e.g. spindle seals, coupling actuators...)

PTFE-rodseal, single acting
helicoil spring activated, asymmetrical PTFE rod seal, low friction and good dry running properties, excellent chemical and thermal resistance, mainly used in chemical, pharma and food industry.

hydraulic, single acting
asymmetrical rod seal for standard applications as S03-P, but due to design with active back-up ring suitable for larger extrusion gaps orhigher pressure.
S04-P for standard housing design.

hydraulic, single acting
asymmetric rod seal for standard applications as S04-P, but design with triangular backring for short housings

pneumatic, single acting
asymmetric rod seal, extremely wear resistant, for use in lubricated or dry pneumatic applications. special design of sealing lip allows retention of initial lubricating film.

pneumatic, single acting
asymmetric rod seal, good wear resistant, for use in lubricated or dry pneumatic applications. good adaption possibilities to diverse temperatures and medias by selection of suitable seal material. special design of sealing lip allows retention of initial lubricating film.

hydraulic, single acting
symmetric rod seal for simple standard applications, not recommended for new designs (profile S01-P should be prefered)

hydraulic, single acting
as profile S06-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.

hydraulic, single acting
O-ring activated symmetric rod seal for simple standard applications, not recommended for new designs (profile S03-P prefered)

hydraulic, single acting
asymmetric compact rod seal, interference fit on outside diameter maintains stable fit in the housing. compact design mainly used to seal high viscosity fluids or for extreme small housings, not suitable for high speed applications. S08-P compact design, no groove

hydraulic, single acting
asymmetric compact rod seal, interference fit on outside diameter maintains stable fit in the housing. compact design mainly used to seal high viscosity fluids or for extreme small housings, not suitable for high speed applications. S08-PE with small groove

hydraulic, single acting
as profile S08-P, but more adaptation possibilities to diverse temperatures and media by selection of suitable seal material.

hydraulic, double acting
O-ring activated symmetric PTFE rod seal, low friction. for extreme low or high speed, suitable for positioning functions.

hydraulic, double acting
profile ring-activated symmetric PTFE rod seal, similar to S09-D, but special heavy duty design for heavy industry hydraulics or for special housing dimension.

hydraulic, single acting
O-ring activated asymmetric PTFE rod seal, low friction. in tandem design together with double acting wipers for extreme low or high speed or positioning facilities. as primary seal in combination with secondary SO1-P seal with good resistance to pressure shocks used in mobile hydraulics, machine tools, injection moulding machines, heavy hydraulics.

hydraulic, single acting
profile ring-activated asymmetric PTFE rod seal, similar to S09-E, but special heavy duty design for heavy industry hydraulics or for special housing dimension.

hydraulic, single acting
O-ring activated asymmetric PU rod seal with excellent dynamic sealing capacity. used as secondary seal in tandem design (together with primary S09-E seal) to minimize residual oil film. for mobile hydraulics, machine tools, injection moulding machines, heavy hydraulics.

hydraulic, single acting
chevron sealing set, parting surface design for heavy industry hydraulics.

hydraulic, single acting
chevron sealing set, machined surface design for heavy industry hydraulics.

hydraulic, single acting
chevron sealing set, design with flexible sealing lips, good sealing ability in higher pressure range. for heavy industry hydraulics, water-hydraulic systems.

hydraulic/pneumatic, single acting
simple hat seal, usually fixed in housing with clamp flange. mainly used for replacement in old hydraulic and pneumatic cylinders or for secondary applications.

hydraulic/pneumatic, single acting
simple hut seal, usually fixed in housing with clamp flange. mainly used for replacement in old hydraulic and pneumatic cylinders or for secondary applications.

hydraulic, single acting
asymmetric rod seal with additional sealing - respectively stabilizing lip. interference fit on outside diameter maintains stable fit in the housing. design mainly used for telescopic cylinders, mobile hydraulic or for special housing dimension.

hydraulic, single acting
as profile S17-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.

hydraulic, single acting
asymmetric rod seal as S17-P, but due to design with active backring suitable for larger extrusion gaps or higher pressure.

hydraulic, single acting
asymmetric rod seal with additional sealing - respectively stabilizing lip and back ring. good adaption possibilities to diverse temperatures and medias by selection of suitable seal material, due to design with active back ring suitable for larger extrusion gaps or higher pressure.

PTFE rod seal, single acting
finger spring activated, asymmetrical PTFE rod seal, low friction and good dry running properties, excellent chemical and thermal resistance, mainly used in chemical, pharma and food industry.

hydraulic, double acting
space saving, compact rod seal, suitable for standard O-ring housings. advantage compared to O-ring: integrated active backrings for high pressure, design with interference fit on outside diameter maintains non-twisting in dynamic applications.

hydraulic, single acting
O-ring activated symmetric rod seal with sharp-edged sealing lips, good sealing effect for high viscosity fluids, not recommended for new designs (profile S03-P prefered)

hydraulic, single acting
symmetric rod seal with support ring for simple applications to serve repair purpose, not recommended for new designs (profile S01-P prefered).

hydraulic, single acting
symmetric rod seal as S22-P, but more adaption possibilities to diverse temperatures and media by selection of suitable seal material.

hydraulic, single acting
O-ring activated rod seal with additional stabilizing lips and integrated active back ring for larger extrusion gaps, mainly used in mining industry.

PTFE chevron sealing set, single acting
optimized for low pressure, unequal angled chevron design results in good contact pressure even in low pressure range. external spring pretension necessary. mainly used in chemical, pharma and food industry.

PTFE chevron sealing set, single acting
optimized for higher pressure, equal angled chevron design suitable for high pressure range. external spring pretension necessary. mainly used in chemical, pharma and food industry.

hydraulic, single acting
chevron sealing set, design with extremely flexible sealing lips for difficult operating conditions (bad guiding, large tolerance range). available as total chevron sealing set as well as intermediate chevrons only (in case of metal mal and female adapters).

hydraulic, double acting
compact rod seal with almost no dead spots as required for applications in food and pharma industry, also commonly used as O-ring replacement, because design with interference fit on outside diameter maintains non-twisting in dynamic applications.